Newsgroups: comp.robotics
Path: brunix!uunet!das.wang.com!wang!pvr
From: pvr@wang.com ()
Subject: Re: Schematic Programs
Organization: Wang Labs, Lowell MA, USA
Date: Fri, 19 Mar 1993 15:43:27 GMT
Message-ID: <C457oG.Aw8@wang.com>
References: <C3zsK6.E3p@mach1.wlu.ca>
Sender: news@wang.com
Nntp-Posting-Host: preilley.wiis.wang.com
Lines: 32

skar7950@mach1.wlu.ca (Raymond Skarratt u) writes:


>I was wondering if there are any schematic desing programs like
>DASH that are available at any FTP sites or just genrally avaiable
>to the public.  Any information on this would be greatly appriciated.

      Try PADS-PCB.   It is available as a fully working demo.   It
is only limited in the size of the design that it will handle.
No more than two board layers and about 20 IC's.   It has a
schematic capture editor, a board layout editor, an auto-router,
and a large parts library.   You can get it from Simtel20.


These files are available via anonymous FTP from WSMR-SIMTEL20.ARMY.MIL
(192.88.110.20) or mirror sites OAK.Oakland.Edu (141.210.10.117),
wuarchive.wustl.edu (128.252.135.4), ftp.uu.net (137.39.1.9),
nic.funet.fi (128.214.6.100), src.doc.ic.ac.uk (146.169.3.7) or
archie.au (139.130.4.6), by e-mail through the BITNET/EARN file
servers, or by uucp from UUNET's 1-900-GOT-SRCS.  See UUNET file
uunet!~/info/archive-help for details.

Directory PD1:<MSDOS.CAD>

PADSLIB.ZIP   B  488615  920212  PADS library for PADSPCB.ZIP and PADSLOG.ZIP
PADSLOG.ZIP   B 1081636  920212  PADS Logic schematic capture CAD program
PADSPCB.ZIP   B 1036461  920212  PADS PCB (printed circuit board) layout pgm


--
-->>>>>>>>>> Peter Reilley ..... pvr@wiis.wang.com ..... KA1LAT <<<<<<<<<<<--
                     Well, that about says it.
